Because of their low profile, Flat Pak modules are ideal for user-designed printed circuit boards where the standard single-channel or Quad Pak modules do not provide an exact fit.
The OAC5P handles 12-140 VAC. This module is used for controlling or switching AC loads. It is equivalent to a single-pole, single-throw, normally open contact (FORM A, SPST-NO, Make). The OAC5P features zero voltage turn-on and zero current turn-off. The module provides up to 4000 V of optical isolation between field inputs and the logic side of the circuit.
Typical uses and applications include switching the following loads:
- Relays
- Solenoids and contactors
- Motor starters
- Heaters
- Lamps or indicators
|
OAC5P |
Operating Voltage Range |
12–140 VAC |
Line Voltage, Nominal |
120 VAC |
Current Rating |
3 A @ 45 °C ambient 2 A @ 70 °C ambient |
Off-state Leakage at Maximum Voltage |
5 mA, rms |
Logic Voltage, Nominal |
5 VDC |
Logic Voltage Range (Vcc) |
2.5–8 VDC |
Logic Pickup Voltage |
2.55 VDC |
Logic Dropout Voltage |
1 VDC |
Logic Input Current at Normal Logic Voltage |
12 mA |
Control Resistance (Rc in Schematic Diagram) |
220 Ohms |
One-second Surge |
n/a |
One-cycle Surge |
80 A peak |
Peak Repetitive Voltage |
500 V |
Minimum Load Current |
20 mA |
Operating Frequency |
25–65 Hz |
Turn-on Time |
1/2 cycle maximum, zero voltage |
Turn-off Time |
1/2 cycle maximum, zero current |
DV/DT, Off-state |
200 V/microsecond |
DV/DT, Commutating |
Snubbed for rated 0.5 power factor load |
Output Voltage Drop Maximum Peak |
1.6 V |
Operating Temperature |
–30 to 70 °C |
Agency Approvals |
UL (E58169), CSA (35852) |
Warranty |
Lifetime |