Because of their low profile, Flat Pak modules are ideal for user-designed printed circuit boards where the standard single-channel or Quad Pak modules do not provide an exact fit.
The ODC5P handles 5-60 VDC. This module is used for controlling or switching DC loads. The module provides up to 4000 V of optical isolation between field inputs and the logic side of the circuit.
Typical uses and applications include switching the following loads:
- DC relays
- DC solenoids
- DC motor starters
- DC lamps or indicators
|
ODC5P |
Operating Voltage Range |
5–60 VDC |
Line Voltage, Nominal |
n/a |
Current Rating |
3 A @ 45 °C ambient 2 A @ 70 °C ambient |
Off-state Leakage at Maximum Voltage |
1 mA |
Logic Voltage, Nominal |
5 VDC |
Logic Voltage Range (Vcc) |
2.5–8 VDC |
Logic Pickup Voltage |
2.5 VDC |
Logic Dropout Voltage |
1 VDC |
Logic Input Current at Normal Logic Voltage |
12 mA |
Control Resistance (Rc in Schematic Diagram) |
220 Ohms |
One-second Surge |
5 A |
One-cycle Surge |
n/a |
Peak Repetitive Voltage |
n/a |
Minimum Load Current |
n/a |
Operating Frequency |
n/a |
Turn-on Time |
100 microseconds |
Turn-off Time |
750 microseconds |
DV/DT, Off-state |
n/a |
DV/DT, Commutating |
n/a |
Output Voltage Drop Maximum Peak |
1.6 V |
Operating Temperature |
–30 to 70 °C |
Agency Approvals |
UL (E58169), CSA (35852) |
Warranty |
Lifetime |