Signal Conditioners – Isolators

Signal Conditioning, Isolators, Level Shifters Filters

These products are required to interface analog and digital signals to PAC, PLCs, DAQ systems, loggers indicators, embeddable & industrial computers, recorders, and controllers etc

DIN Rail – Backplane – Rack Mount – Bench – Chassis – Computer Bus and others

Signal Conditioners are typically linked to transducers – Strain Gauge, Thermocouple, RTD, Thermistor, Silicon Temp, 4-20mA, mV, V, Potentiometer, Quadrature Encoders, Absolute Encoders, Frequency, Filters etc

Many Signal Conditioners are isolated and have high common mode rejection to remove 50/60HZ AC noise etc.

Some Signal Conditioners convert voltage to frequency and then gated counters are used to capture the data, as in OPTO 22 systems.

Most Signal Conditioners are analog in and analog out with conversions, say millivolts in and 4-20mA out or RTD in and +/-5volt out etc.

A title

Image Box text

A title

Image Box text

A title

Image Box text

A title

Image Box text

A title

Image Box text

A title

Image Box text

Signal Isolators are used to break ground loops in long cable runs and can be 4-20mA to 4-20mA or 0-10V to 4-20mA with translators also.

Signal Level Shifters translate a 230 AC signal to 5V DC logic output or 100VDC to 24 VDC logic output etc with isolation

Signal Filters are in many signal conditioners but if additional filtering is required these come in many forms also.

Front Page Summary