A title

Image Box text

A title

Image Box text

Ceiling

TC sensors are ceiling-mounted in an unobtrusive housing. The easy-to-install units are ideal for office environments, as well as museums, galleries, or any other open setting. These sensors are highly accurate, reliable, and come with an extended five-year warranty.

    APPLICATIONS
  • Hospitals and operating rooms, pharmaceutical labs Clean rooms
  • Food processing plants – Environmental testing facilities and other institutional applications
  • Ceiling mount probe for more accurate readings…ideal for open office environments
  • Recessed press-fit sensor virtually “disappears”…great for museums and galleries

TCBB1

100 ohm platinum RTD, with temperature documentation at 25°C. (4″ probe)

A title

Image Box text

TCGH0

10k ohm type 3 thermistor. (24″ probe)

A title

Image Box text

Available in 4″, 6″, 8″, 12″, 18′ and 24′

The TC Series ceiling mount temperature sensors are ideal for space temperature applications where hot and cold spots are hard to avoid. Avoid temp influences such as windows and mobile influences such as copy machines by getting out into the middle of the room and high enough to avoid common sources of thermal offset.

Recessed

For applications where independent measurement of single or three phase circuits is needed. Veris provides multiple products designed to meet your application requirements.

TSB0

100 ohm platinum RTD.

A title

Image Box text

TSC1

1000 ohm platinum RTD, with temperature documentation at 25°C.

A title

Image Box text

Duct

Veris provides a wide array of duct temperature sensors for your HVAC applications. From standard flange to units with electrical enclosures and specialty enclosures Veris can meet your duct temperature sensor needs.

Veris’ duct mount temperature sensors are pre-calibrated and housed in sturdy stainless steel probes. The devices are easy to install, durable, and highly accurate. No calibration required Stainless steel probe

Transmitter

TDDAM10 – 8 inch probe, 4-20mA output, scaled -40°C to 50°C (-40°F to 122°F).

A title

Image Box text

Indoor Box

Duct mount temperature sensor with resistive output and sheet metal box. (Ranging from 4-36 inch probes)

TFBBR00 – 100 ohm platinum RTD.

Open

Flange fixed duct mount temperature sensor with resistive output and foam gasket. (Ranging from 4-24 inch probes)

TDBBR00 – 100 ohm platinum RTD.

Raintight

Duct mount temperature sensor with resistive output and waterproof housing. (Ranging from 4-36 inch probes)

TGBBR00 – 100 ohm platinum RTD.

Immersion

Immersion temperature sensors and thermo-wells are available with or without electrical enclosure. Choose from a duct type enclosure, standard service entry body and threaded NPT options. Most standard thermistors are available.

    APPLICATIONS
  • Tanks
  • Pipes
  • Chillers
  • Corrosion resistant stainless steel probe design

Duct –

Immersion temperature sensors with resistive output and duct style enclosure.

TIDA0B0 – 2-1/2 in Probe – 100 ohm platinum RTD. (Also ranging from 4-12 inch probes)

A title

Image Box text

Threaded Pipe

Immersion style temperature sensor with resistive output and threaded body housing for direct to pipe mounting.

TIHA0B0 2-1/2 in Probe – 100 ohm platinum RTD. (Also ranging from 4-12 inch probes)

TFBBR00 – 100 ohm platinum RTD.

Entrance ‘L’ –

Immersion style temperature sensors with resistive output and service entry enclosure for conduit connection.

TIGA0B0 – 2-1/2 in Probe – 100 ohm platinum RTD. (Also ranging from 4-12 inch probes)

TDBBR00 – 100 ohm platinum RTD.

Water-Resistant

Wat Immersion style temperature sensor with resistive output and water resistant housing.

TIWA1B2 – 2-1/2 in Probe -10K Ohm Type 2 Thermistor with Thermowell. (Also ranging from 4-12 inch probes)

TGBBR00 – 100 ohm platinum RTD.

Outdoor

The TO Series outdoor temperature sensors feature a sleek, weather resistant design, and provide easy installation. The durable probe is encased in a radiation shield to prevent solar heating. Choose from a variety of RTD, thermistor, or transmitter outputs to suit any application.

TOAM10

4-20mA output, scaled -40°C to 50°C (-40°F to 122°F).

A title

Image Box text

TOAM21

4-20mA output, scaled 0°C to 50°C (32°F to 122°F), with temperature documentation at 25°C.

A title

Image Box text

Specialty

Veris provides Duct Averaging, Pipe Clamp Mount, and Remote “Bullet” Probe sensors rounding out a line that will meet your needs in temperature monitoring.

Duct Averaging

TAHB0 – 12′ (3.6m) probe length, 100 ohm platinum RTD.

A title

Image Box text

Remote Probes

TKBBR00 – 2.5″ Pencil Probe, SS. 100 Ohm Platinum RTD.

A title

Image Box text

Pipe Clamp Mount

TBAB0 – 2.5″ circumference clamp, 100 ohm platinum RTD.

A title

Image Box text

VAV Discharge

The TJ series provides a flange mount duct temperature sensor with 5′ of plenum rated wire already attached to the sensor. This eliminates the need to splice plenum rated wire to standard wire as would be required with a standard duct sensor in many VAV Discharge applications. The TJ series is available with 4″ and 8″ probes and most standard resistive types.

4in Probes TJBBR00 – 100 ohm platinum RTD, standard 5′ of cable.

A title

Image Box text

8in Probes

TJDBR00 – 100 ohm platinum RTD, standard 5′ of cable.

A title

Image Box text

Wall Mount

These wall mount temperature sensors feature a disceet appearance combined with high accuracy and reliability. All are attractive enough for any interior environment. Installation and wiring are easy, with the housing mounting flush to the wall or to a single-gange junction box.

TP flush mounted temperature sensors monitor the temperature of the air in a room and are ideal for spaces where moisture and vapor are concerns. The back of the TP is insulated to reduce interior wall temperature influence. The TP sensor is designed for indoor use only. These sensors are highly accurate, reliable, and come with an extended five-year warranty.

    APPLICATIONS
  • Hospitals and operating rooms, pharmaceutical labs
  • Clean rooms
  • Food processing plants
  • Environmental testing facilities and other institutional applications
  • Standard wall plate…ideal for open office environments

Standard

TPB0 – 100 ohm platinum RTD

A title

Image Box text

Standard – w/Override

TEB10 – 100 ohm platinum RTD, pushbutton override.

A title

Image Box text

Deluxe – with display

TWLP Series featuresembedded BACnet and Modbus communication protocols and temperature sensing capability. The setpoint slider and pushbutton override offer additional local input.

TWLPXXX – BACnet and Modbus temperature output. CE.

Standard – w/Slide Pot

TEC20 – 1000 ohm platinum RTD, 1000 ohm setpoint slider.

A title

Image Box text

Deluxe – non-display

These wall mounted temperature sensors feature a discreet appearance combined with accuracy and reliability. Aesthetically pleasing in any interior environment. Flexible mounting options include flush and single-gang for ease of installation.

TWXA00 – Selectable 0-5VDC/0-10VDC/4-20mA temperature output. CE.

A title

Image Box text

A title

Image Box text